It wasnt hard, just time consuming. I started by buying a piece of 3/4 inch thick subfloor/plywood at Lowes. I was feeling lazy so I asked them to cut it to size for me, which they did at no extra charge. The size of the plywood part is 53 inches x 3 feet tall. With the legs on the bottom, the total height is 4 feet. I bought 3 - 1 x 3s to attach to the back of the plywood as shown in the photo below.
Next, I laid high loft quilt batting on the floor that I bought at the craft store and placed the headboard on top. I bought the largest size and then folded it over 3 times, so it would be pretty thick.
Without pulling too tightly, I pulled the batting around and began to staple it to the back of the headboard. You dont want to pull it too tightly or it might come apart.
I continued this all the way around the frame. Corners are a little bulky and tricky, but heres a closeup of mine. Not perfect, but doesnt need to be.
To get rid of the excess batting at the legs of the headboard....
I simply cut about an inch off the batting, tucked it under and stapled it behind the headboard.
When the batting is all attached, it will look like this.
Next up, is the fabric. Because I was keeping cost down, I used canvas painters drop cloth that I already had. I basically repeated what I just did with the batting.
Take extra care when working on the corners so you dont have a wrinkly mess since the corners will show. I found that folding it over like you would wrap a Christmas present worked well. And I also worked on the corners last. I then cut off all the extra batting and fabric.
And heres the front...
I really wanted nailhead trim, however, I couldnt find that where I live so I used bronze upholstery tacks that I picked up at Lowes. Very time consuming but I definitely got the look I wanted. I was actually happy I couldnt find the trim because I really preferred the nail heads being spaced a bit instead of touching. To perfectly line them up, I measured inside the corner 4 inches on both sides and marked with a pen, then gently tapped in one tack, but I did not hammer it in all the way in. I looped a piece of twine around the tack, then did the same thing on the other end and tied the other end of the twine to that tack. This created a perfectly straight guideline for me to line up the tacks. When youre finished, remove the twine and hammer in the end tacks the rest of the way.
It took all afternoon, but I am soooo happy with it! I cant wait to put it in his room. Ive got a couple more projects to do for the space and then I will put the whole room together and blog about it next week. I cant wait to get this finished up for him!Have a great weekend!
Langganan:
Posting Komentar (Atom)
Postingan Populer
-
woodworking machinery suppliers in india Woodworki...
-
Welcome to your blog. This is a test post. Feel free to delete this post after you view.
-
Often, I will have an idea of a paint technique or design I want to try on a piece of furniture, before I even have a piece of furniture to ... -
First I want to tell you how much I enjoyed reading about all of your wonderful Fall memories and traditions. Its such a blessing to be abl...
-
I finished up a little frenchy damask lined cabinet today. I distressed all the accents, corners and edges. Shes been painted and lined for... -
woodworking joints pros and cons The advantages an...
-
woodworking machinery thailand Positioned as the o...
-
In the beginning I used an inexpensive compressor ($90) with a small tank and low pressure capacity. When I sprayed a large project it... -
Hey there! Ive received a number of emails lately asking how I built my dining room table or how I attached the top to the dining room tabl...
Copyright © 2014-2022 I Love Woodworking | Powered By Blogger
0 komentar:
Posting Komentar